Penn Radiant Products - The Wind Blocker™ Tinted Ceramic Glass Series Infrared Patio Heaters

Unit of Measure

Items	WB35 -N7 The Wind Blocker™ Tinted Ceramic Glass Series 6.0 Inch Water Column (WC) Burner Pressure Infrared Patio Heater Net Price QUOTE Add To Cart Request Quote	WB35 -L7 The Wind Blocker™ Tinted Ceramic Glass Series 11 Inch Water Column (WC) Burner Pressure Infrared Patio Heater Net Price QUOTE Add To Cart Request Quote
Description	N/A Extend The Outdoor Heating Season The new Space-Ray® Wind Blocker™. Tinted Ceramic Glass Series patio heaters are the perfect solution to extend the outdoor season by providing the warmth of radiant heat. Provides a level of comfort for your outdoor dining and entertainment areas. Perfect for other partially covered outdoor environments like patios, bars and smoking areas. Increases available outdoor restaurant seating capacity and revenue. For consumers it extends the outdoor season, permitting enjoyment of the outdoor space.
Brands	N/A Penn Radiant Products Space-Ray®
Control Options	N/A Two Stage
High Input	N/A 35000 Btu/hr
Low Input	N/A 24000 Btu/hr
Horizontal Typical Mounting Height	N/A 8 to 11 ft
Angle Typical Mounting Height	N/A 7 to 9 ft
Note for Typical Mounting Height	N/A The suggested mounting heights and spacing are subject to site conditions. Heaters can be operated at excessive weather conditions. Excessive weather and high winds (15+ mph) can reduce the effectiveness of the heaters.
Horizontal Spacing Between Heaters	N/A 8 to 16 ft
Angle Spacing Between Heaters	N/A 6 to 14 ft
GAS Type	N/A Natural	N/A Propane
Burner Pressure	N/A 6.0 inWc	N/A 11 inWc
Minimum Supply Pressure	N/A 7 inWc	N/A 11.5 inWc
Maximum Supply Pressure	N/A 14 inWc
Alternating Current (AC) Voltage	N/A 120 V
Frequency	N/A 60 Hz
Current	N/A 0.1 A
Ignition Type	N/A Direct Spark
Glass Material	N/A Ceramic
Dimension A	N/A 9-1/2 in
Dimension B	N/A 11-1/2 in
Dimension C	N/A 48 in
Certification	N/A Cloud Security Alliance (CSA)
Shipping Weight	N/A 55 lb
Industry Standards	N/A American National Standards Institute (ANSI) Z83.19 American National Standards Institute (ANSI) Z83.26
Optional WB Accessories	N/A Item Name: Heat Shield Item Description: Overhead Clearance Reduction. Through use of the optional Heat Shield, clearances above the heater can be reduced for applications with tighter overhead space. Item Name: Wall Or Ceiling Mount Item Description: Optional Mounting Bracket. The adjustable mounting brackets allows wall mounted or ceiling suspended heater installations at varying angles.
WB Control Options	N/A High Efficiency Ceramic tiles that produce environmentally friendly emission levels below nationally recognized levels (as defined by California Energy Commission). NOx emission levels as low as 15 parts per million adjusted for 3 % O₂. Indoor or Outdoor Rated. Can be exposed to outdoor elements - rain or snow. Wind resistance up to 40 mph wind force. Tinted ceramic glass technology and Space-Ray®'s unparalleled burner design and operation leaves other competitive patio heaters behind. Extremely quiet operation. No blower or fan noise. Potted (Water Resistant) Direct Spark Ignition module for harsh environmental conditions. The ceramic tiles on the emitter are rotated horizontally to spread the comfort evenly and provide a soft red glow of infrared energy. The burner box is constructed with weather resistant, zinc plated materials with 3 mil black hi-temperature silicone powder coated paint. Specially designed internal reflectors enhance the radiant outputand are totally hidden behind the tinted ceramic glass. Horizontal or angle mounting up to 60º. Can be suspended from ceiling or angle mounted from column or sidewall with optional adjustable mounting brackets. Can be installed with 45 or 60 degree angles at lower mounting heights (e.g.,7 ft.) to reduce intensity. Clearances as low as 10" above theheater withoptional shield. 3-year limited warranty on the burner assembly, and 1-year limited warranty on the controls. Manufactured with pride in the USA. Aesthetic Design Single Or Two Stage Operation Fixed Installation for Use with Natural or LP Gas	N/A Item Name: Control Switch (L7) Item Description: Individual Or Zone Control. Heaters can be controlled individually or in zones using 3-position switch or a thermostat. This permits low fire on mild days or full power on cold days.
Features	N/A High Efficiency Ceramic tiles that produce environmentally friendly emission levels below nationally recognized levels (as defined by California Energy Commission). NOx emission levels as low as 15 parts per million adjusted for 3 % O₂. Indoor or Outdoor Rated. Can be exposed to outdoor elements - rain or snow. Wind resistance up to 40 mph wind force. Tinted ceramic glass technology and Space-Ray®'s unparalleled burner design and operation leaves other competitive patio heaters behind. Extremely quiet operation. No blower or fan noise. Potted (Water Resistant) Direct Spark Ignition module for harsh environmental conditions. The ceramic tiles on the emitter are rotated horizontally to spread the comfort evenly and provide a soft red glow of infrared energy. The burner box is constructed with weather resistant, zinc plated materials with 3 mil black hi-temperature silicone powder coated paint. Specially designed internal reflectors enhance the radiant outputand are totally hidden behind the tinted ceramic glass. Horizontal or angle mounting up to 60º. Can be suspended from ceiling or angle mounted from column or sidewall with optional adjustable mounting brackets. Can be installed with 45 or 60 degree angles at lower mounting heights (e.g.,7 ft.) to reduce intensity. Clearances as low as 10" above theheater withoptional shield. 3-year limited warranty on the burner assembly, and 1-year limited warranty on the controls. Manufactured with pride in the USA. Aesthetic Design Single Or Two Stage Operation Fixed Installation for Use with Natural or LP Gas	N/A In indoor and tightly sealed buildings this heater requires ventilation. An indirect vented installation requires a minimum ventilation flow of 4 CFM per 1000 BTU/hr of total installed heater capacity on natural gas by either gravity or power ventilation.
Venting Requirements - Indoor Installations	N/A In indoor and tightly sealed buildings this heater requires ventilation. An indirect vented installation requires a minimum ventilation flow of 4 CFM per 1000 BTU/hr of total installed heater capacity on natural gas by either gravity or power ventilation.
Installation Requirements	N/A Installation and service must be performed by a licensed contractor. The installation must conform to manufacturer's installation and operating instructions and local codes. In the absence of local codes, the installation must conform with the National Fuel Gas code, ANSI Z223.1 (also known as NFPA54) or GCA B149 installation codes.
For Your Safety	N/A Operate Wind Blocker™ infrared heaters with proper care and observe all safety precautions. Carefully follow printed installation, operating and cleaning instructions furnished with the heater. Do not store gasoline or combustible products in the vicinity of the heater. Keep children, clothes and drapery away from the heater. Do not touch the heater glass or the housing while the heater is in operation. Adequate ventilation must always be provided in accordance with national, state or local codes.
Additional Information	N/A Using the same principle as the sun, radiant warmth from Space-Ray®'s Wind Blocker™ Series is delivered directly to people at floor level first, before heating the surrounding air. This provides a comfortable envelope of warmth in seating areas below. Designed with high temperature tinted glass which provides additional protection on windy days and enhances the heater's aesthetic appeal - unlike typical infrared patio heaters which are affected by the adverse effects of the wind and weather conditions, often resulting in flame lift-off - called heat rollout - and reduced efficiency in windy conditions. Tinted ceramic glass provides cover for burner, protecting it from the wind and permitting consistent heat output. No flame lift off (heat rollout). Clearances above can be as low as 10" with optional shield. Can be suspended from ceiling or angle mounted from column or sidewall with optional mounting brackets. 3 mil hi-temp silicone powder coated paint for durability. Covers 12' x 12' area with minimal wind conditions. Factory shipped as a two stage control heater and can be used with optional 3 position switch for ultimate comfort. Operate at first stage (24,000 Btu/hr) during milder days and operated at full power (35,000 Btu/hr) on colder days. Can be operated at full power (35,000 Btu/hr) as a single stage heater by a simple factory supplied jumper wire.	N/A Using the same principle as the sun, radiant warmth from Space-Ray®'s Wind Blocker™ Series is delivered directly to people at floor level first, before heating the surrounding air. This provides a comfortable envelope of warmth in seating areas below. Designed with high temperature tinted glass which provides additional protection on windy days and enhances the heater's aesthetic appeal - unlike typical infrared patio heaters which are affected by the adverse effects of the wind and weather conditions, often resulting in flame lift-off - called heat rollout - and reduced efficiency in windy conditions. Tinted ceramic glass provides cover for burner, protecting it from the wind and permitting consistent heat output. No flame lift off (heat rollout). Clearances above can be as low as 10" with optional shield. Can be suspended from ceiling or angle mounted from column or sidewall with optional mounting brackets. 3 mil hi-temp silicone powder coated paint for durability. Covers 12' x 12' area with minimal wind conditions. Factory shipped as a two stage control heater and can be used with optional 3 position switch for ultimate comfort. Operate at first stage (24,000 Btu/hr) during milder days and operated at full power (35,000 Btu/hr) on colder days. Can be operated at full power (35,000 Btu/hr) as a single stage heater by a simple factory supplied jumper wire.
Note	N/A	N/A Can be operated as a single stage heater with factory supplied jumper wire.